This RC receiver unit is FlySky AFHDS compatible. It offers full 4-channel support in ultra-light

weight and micro size. It is designed for micro racing cars.

MX Nano Tran 是一款超小体积红外转发器，适用于 EASYLAP 系统和 MXO 无线 LAP 系统。

MXO-RACING RXC87E-A1(FLYSKY-AFHDS-1A) Super Micro SurfaceRX/8CH/Built-in B-ESC/7CH Light Control/For 1/87~1/64 Car/Deltang/DT

This RC receiver unit is FlySky AFHDS 2A compatible. It offers full 4-channel support in ultra-light weight and micro size. It is designed for micro racing cars.

  MXO-RACING RXC52-X&TP Series Super Micro SurfaceRX/4CH/MINIZ/ATM/DRZ/GL/Transponde

  This version supports the built-in Transponder.

  The first micro surface rx with an antenna-less version that integrates a transponder with editable personal ID number.
  After using this receiver, users no longer need to install traditional bulky transponders on 1/28~1/24 RC cars.
  Users can also modify the transponder's personal ID number easily and unlimited times.
  When the transponder is not in use, the user can turn off the transponder on the receiver through the GUI (TP_LED is off )

MXO-RACING RXC87E-A2(FLYSKY-AFHDS-2A) Super Micro SurfaceRX/8CH/Built-in B-ESC/7CH Light Control/For 1/87~1/64 Car/Deltang/DT

This RC receiver unit is Flysky Noble NB4 compatible. It offers full 4-channel support in ultra-light weight and micro size. It is designed for micro racing cars.

30mm EDF motor aircraft model fixed-wing 30mm ducted fan aircraft model 15.8 USD per pair (one on each side)

    FR7018T-X V1.0 is a 7CH receiver with diversity dual antennas with a working distance of up to 1000~1500 meters. It integrates 20A/3S brushless ESC and DCDC step-down BEC power supply, and supports full-distance TELEM function (Only D, F2, A2 versions support this function), but the weight and volume are quite small, which can greatly reduce the flight weight and equipment installation space of the model aircraft. There are currently 5 versions in this series.

MXO-RACING RXC87E-D(DSMX/2) Super Micro SurfaceRX/8CH/Built-in B-ESC/7CH Light Control/For 1/87~1/64 Car/Deltang/DT

MXO-RACING This RC receiver unit is FUTABA-SFHSS full range of remote controls compatible. It offers full 4-channel support in ultra-light weight and micro size. It is designed for micro racing cars.

Programming card for ERUN-20A

  FR7012-X V2.0 is a 7CH receiver designed specifically for F3P model airplanes, it integrates 20A/3S voltage regulation and DCDC pressure type BEC power supply, but the weight and volume are quite small, so it can greatly reduce F3P flight weight, thereby making F3P flight action more flexible. Currently, this series is available in 5 versions.

MXO-RACING RXC87E-S(FUTABA-SFHSS) Super Micro SurfaceRX/8CH/Built-in B-ESC/7CH Light Control/For 1/87~1/64 Car/Deltang/DT

This RC receiver unit is FUTABA-SFHSS full range of remote controls compatible. It offers full 4-channel support in ultra-light weight and micro size. It is designed for micro racing cars.

MXO-RACING RXC87E-F1(FRSKY-D8) Super Micro SurfaceRX/8CH/Built-in B-ESC/7CH Light Control/For 1/87~1/64 Car/Deltang/DT

MXO-RACING RXC42-D(DSM2) V2 Super Micro SurfaceRX/4CH/MINIZ/ATM/DRZ/GL

MXO-RACING RXC87E-F2(FRSKY-D16) Super Micro SurfaceRX/8CH/Built-in B-ESC/7CH Light Control/For 1/87~1/64 Car/Deltang/DT

This RC receiver unit is KYOSHO ASF compatible. It offers full 4-channel support in ultra-light weight and micro size. It is designed for micro racing cars.

XR602T-S is totally new designed receive, which has a multifunctional UART port(DMA operation)for double and two-way communication, it can outpu SBUS and FPORT signal at the same time, also support RSSI output and online firmware updating. It is 100% compatible with SFHSS.

  E122-1S is a miniature brushed two-way ESC designed for 1/87, 1/64, 1/72 and other RC car models. It can be used as a power ESC or as a DC with travel switch limit. Motor controller is used. E122-1S supports three signal inputs: PWM, inverting SBUS, and MBUS, so it can be used in a variety of ways.

This RC receiver unit is FUTABA-SFHSS full range of remote controls compatible. It offers full 4-channel support in ultra-light weight and micro size. It is designed for micro racing cars.

XR602T-A is totally new designed receiver supports telemetry, which has a multifunctional UART port（DMA operation） for double and two-way communication, it can outpu SBUS and FPORT signal at the same time, also support RSSI output and online firmware updating. It is 100% compatible with FLYSKY AFHDS-2A.

  E212-1S is a miniature 2-way bidirectional brushed ESC designed for 1/87, 1/64, 1/72 RC car models. It can be used as 2-way independent power ESC, or it can be set up as a tank or differential ESC. E212-1S supports PWM, reverse SBUS, MBUS three signal inputs, so it has multiple uses.

This RC receiver unit is SANWA full range of remote controls compatible. It offers full 4-channel support in ultra-light weight and micro size. It is designed for micro racing cars.

CROSSOVER RX XR602T-D is totally new designed receiver supports telemetry, which has a multifunctional UART port（DMA operation） for double and two-way communication, it can outpu SBUS and FPORT signal at the same time, also support RSSI output and online firmware updating. It is 100% compatible with DSMX/2.

  The RXC87-3E-X series receiver is a highly integrated micro receiver designed for 1/87, 1/72 and other car models. It integrates three-way brushed bidirectional ESC, multiple servo signal outputs and one inverted SBUS output in an ultra-small size, and also provides an automatic frequency binding function. Currently, a total of 8 versions are available.

CROSSOVER RX XR602T-F2 is totally new designed receiver supports telemetry, which has a multifunctional UART port（DMA operation） for double and two-way communication, it

can outpu SBUS and FPORT signal at the same time, also support RSSI output and online firmware updating. It is 100% compatible with FRSKY-D16.

1） MX USB PG-ISP-87RC;

2) 1.5mm 3P to 1.0mm 3P adapter and cable;

3) 1.0mm 3P to 1.0mm 3P adapter and cable;

    AR3201/AR3201G is a kind of highly integrated receiver(built-in two brush 5A ESCs, one receiver, SR3X  3-axis(option), DCDC-5A/1A boosting power). It is very helpful for DIY or rebuilding model airplanes weight between 25-100g.

Click here to buy more servos！

Ma-RX42E Series Built-in brushless ESC/GYRO(option)/SR3X(option)/5CH MicroRX/TELEM

Click here to buy more servos！

    MXL-RX62E Series Receivers/linear servos/Built-in brushless ESC/TELEM/SR3X(option)/GYRO(option)/5CH/mini RC model aircrafts

    MXL-RX62E-X V3.1 series receivers are developed on the basis of MXL-RX62H-X V3.0, on which are integrated with 5A/1S brushless ESC, the length of the board is only 8.2mm longer than that of MXL-RX62H board, in this case, MXL-RX62E-X receiver also can be installed on micro model airplanes very easily and bring customer brushless flight fun. Besides, some versions of MXL-RX62E-X supports TELEM function. We can supply 4 versions in total at present.

    MA-RX42-X V2系列接收器是旧版本（2016）的升级版，体积更小，更稳定，并增加了TELEM功能。它仍然提供4个独立输出端口和1个集成5A/1S有电调。我们最多可以提供8种类型的V2接收器

    MXL-RX62H Series Receivers/linear servos/Built-in brushed ESC/TELEM(option)/SR3X(option)/GYRO/mini RC model aircrafts

    MXL-RX62H Series is serial compatible receivers specially designed for mini RC model aircrafts. two linear servos are integrated on board, two independent ports for output., one output port for integrated brushed 3A speed controller, one signal port for brushed ESC.