Protocol

    AR3201/AR3201G is a kind of highly integrated receiver(built-in two brush 5A ESCs, one receiver, SR3X  3-axis(option), DCDC-5A/1A boosting power). It is very helpful for DIY or rebuilding model airplanes weight between 25-100g.

Click here to buy more servos！

XR602T-A is totally new designed receiver supports telemetry, which has a multifunctional UART port（DMA operation） for double and two-way communication, it can outpu SBUS and FPORT signal at the same time, also support RSSI output and online firmware updating. It is 100% compatible with FLYSKY AFHDS-2A.

XR602T-S is totally new designed receive, which has a multifunctional UART port(DMA operation)for double and two-way communication, it can outpu SBUS and FPORT signal at the same time, also support RSSI output and online firmware updating. It is 100% compatible with SFHSS.

Click here to buy more servos！

    MXL-RX62E-X V3.1 series receivers are developed on the basis of MXL-RX62H-X V3.0, on which are integrated with 5A/1S brushless ESC, the length of the board is only 8.2mm longer than that of MXL-RX62H board, in this case, MXL-RX62E-X receiver also can be installed on micro model airplanes very easily and bring customer brushless flight fun. Besides, some versions of MXL-RX62E-X supports TELEM function. We can supply 4 versions in total at present.

    MA-RX42-X V2 series of receivers are upgraded from the old version(2016), smaller and more stable with additional TELEM function.  It still provides 4 independent output ports and 1 integrated 5A/1S brush ESC. We can supply up to 8 types of V2 receivers

    AR3207G-X V1.0 is an ultra-miniature 7-channel programmable receiver that built-in 7A/2S brushless ESC and SR3X system. Its volume is only 24.0*16.0*6.5mm. The built-in DCDC step-down circuit enables the receiver to be directly connected to 2~3S Li-Po battery. A total of 6 versions are currently available.

    Click here to buy more servos！