CROSSOVER-RX Ma-RX42 V2 Series Receivers 5CH MicroRX/TELEM(option)

    MA-RX42-X V2 series of receivers are upgraded from the old version(2016), smaller and more stable with additional TELEM function.  It still provides 4 independent output ports and 1 integrated 5A/1S brush ESC. We can supply up to 8 types of V2 receivers

Features

1）Modulation:Compatible FRSKY-D16
2）Small size:   18.5*12.0*6.5mm(not including antenna)
3）Super light: 0.9g(including antenna)
4）Working voltage:3.0~5.0V
5）With built-in 5A/1S brush ESC (Lock starting function)
6）Support connecting outside brush ESC or brushless ESC
7）Binding automatically
8）Support TELEM function(only available on advanced version)

Note: not support PPM output anymore!

Connection Diagram

Auto binding

    As it is difficult to reach the binding button when the receiver has been installed inside the plane, we developed self-binding function, it works like this:      The receiver will enter binding mode automatically after powered and no signal for 15 seconds (slow flashing LED light turns to fast flashing), then complete the binding operation according to your transmitter binding manual.

Start-Lock Function

    Start-Lock Function is the onboard brush ESC function of preventing brush motor from starting by mistake.  It can protect the brush motor from starting even throttle stick not at the lowest position when the receiver is powered.

    As soon as the receiver gets the signal and the throttle stick on your transmitter is at the lowest position for 2 seconds the first time, Start-Lock will be released then, the brush motor will run when the throttle stick is pushed.

TELEM function

    TELEM function is useful on monitoring battery voltage, receiver working voltage and its signal strength as well as its working temperature in real time, through which customer can get working state of receiver and battery discharging state under control, so flying out of control range and over discharging will rarely happen ( for brushless motor rotation speed or flight height monitoring, customer needs to choose a more advanced receiver)

    NOTE: The effective control range of TELEM function depends on transmitter, it is possible that this would happen: the working range of the receiver is far more than TELEM function effective range, it is normal and alright!

Ma-RX42-X series receivers have the following 8 versions

Mi-LSM1300 Micro Digital Servo

size：18.1*15.2*7.8 mm；

Range：8 mm；

Weight：1.1 g（not including wires）

Torque：35 g／4.2 V；

Speed：0.12 s／4.2 V；

Working voltage：3.5~4.2 V

Connector: mini JST 1.0mm or mini JST 1.25mm

Mi-S1700 Micro Digital Servo

size：18.2*13.5*6.2 mm；

Weight: 1.7g（not including wires）

Working voltage:3.2~4.2V

Operatingspeed(at noload):0.055±0.005sec/60°

Runningcurrent (at noload):75±10mA

Stalltorque(at locked):0.07±0.01Kg.cm

Stall current(atlocked):250±30mA

Idlecurrent(at stopped):2±1mA

InstitutionslimitAngle:155°±2°

Connector: mini JST 1.0mm

Mi-S1900 Micro Digital Servo

size：22.5*13.45*6.2 mm；

Weight: 1.9g（not including wires）

Working voltage:2.8~4.2V

Operatingspeed(at noload):0.05±0.01sec/60°(3.7V) ~0.04±0.01sec/60°(4.2V)

Running current (at no load):65±10mA(3.7V) ~70±10mA(4.2V)

Stalltorque(at locked):0.50±0.05kg·cm(3.7V)~0.55±0.05kg·cm(4.2V)

Stall current (at locked):450±50mA(3.7V) ~500±50mA(4.2V)

Idle current (at stopped):2±1mA

InstitutionslimitAngle:155°±2°

Connector: mini JST 1.0mm

Mi-S2200 Micro Digital Servo

size：25.6*20.16*8.47 mm；

Weight: 2.0g（not including wires）

Working voltage:2.8~4.2V

Operatingspeed(at noload):0.07±0.01sec/60°

Running current (at no load):60±10mA

Stalltorque(at locked):0.15±0.01kgf·cm

Stall current (at locked):280±20mA

Idle current (at stopped):2±1mA

Institutions limit Angle:200°±2°

Connector: mini JST 1.0mm

Shipment

    All items will be checked carefully before shipment.We will pack and ship the parcel with 5 day. ( There will be delay when holidays. )

    racking information is available within 1-4 days after shipment. We will ship via SF Express or FedEx & UPS. Usually, the shipping time is 7-45 business days. If you can't receive your item, please feel free to contact me for help.

Feedback

    If you are not satisfied with the items, please feel free to contact me for solution instead of leaving neutral or negative feedback, We will try our best to solve the problem.

    Please leave positive feedback and 5 stars if you are satisfied with our items and services.  :) Thank you

DECLARATION

1）The Ma-RX42 series RX are Not a copy or fake products of other companies；

2）MXO-RF and CROSSOVER-RX brand guaranteed its high quality and continuous technical service.